HSH-C (0.5t-9t)

·Slipping clutch overload protection is standard
·Hook was made by 35CrMo.
·Working temperature -40℃—+60℃
·Capacity from 500KG~9000KG
·High quality powder coating provide great corrosion proof.



Each unit comes fully certified with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006/42/EC. This document clearly states the proof test at 1.5 times the rated capacity and the light load test of 2% of the rated capacity, which exceeds the requirements of the current applicable standard.

Safety Brake:

The PROLH comes equipped with our own unique dual brake mechanism that automatically engages when the lever hoist feels the slightest resistance on the bottom hook. This key feature means that the PROLH will raise, hold, and lower the lightest of loads without slipping. The two stage process protects against accidental light load failures caused by putting the hoist into neutral whilst under load.

The bonded friction discs are free of asbestos and achieve highly efficient braking.

Load Chains:

Tiger only use the highest quality alloy, calibrated load chains in Grade 80 (T) or 100 (V) conforming to EN818-7 and ISO 16872. The PROLH comes as 1.5mtr HOL as standard but can be chained up to whatever length is required. Stainless steel load chain available on request for certain capacities.

Mechanical Efficiency:

All major components are heat treated and precisely machined to ensure long term smooth operation. High gear ratios keep physical effort to a minimum.

Light Load Protection:

The unique brake system designed for the PROLH guarantees a light load protection at 2% of the rated capacity.

Quad Cam Type Brake Pawls:

This latest development in brake efficiency guarantees permanent engagement of at least one of the two reciprocating cam pawls fitted to the PROLH, ensuring the pawl only just clears the ratchet wheel, with the minimum of clearance as required under BS 4898:1973. But most importantly, in the unlikely event of a pawl spring failure, this new design will ensure the brake is still fully functional and the load is sustained without damage to the mechanism.

Brake Efficiency:

Tiger uniquely uses an 8 point multi start thread pinion shaft which has measurably increased the efficiency in brake reaction times.

Overload Protection:

The PROLH lever hoist can be fitted with a slipping clutch overload mechanism to protect it from overload. When the load limit is exceeded, the clutch in the chain wheel will slip, allowing the handle to be operated whilst not engaging the gear box. This prevents further lifting of the load, though lowering is still possible.


Our hooks incorporate our latest Patent Pending (GB1420387.1) “EZ Check” feature which allows operators and inspection engineers to easily check to see if the hoist has been previously overloaded or shock loaded by simply measuring between the triangle of pop marks.

Our drop forged and heat treated alloy hooks are furnished with heavy duty spring latch kits that fully engage into the recessed nose of the hook safeguarding the load when side loading of the latch occurs and offering maximum load security. The swivel hooks are attached to the yoke using high grade nuts & bolts allowing for complete inspection during any statutory inspection or written scheme maintenance.

Also available with spark resistant hooks.

One Piece Construction Pinion Gears:

PROLH gearboxes contain one piece pinion gears.  This revolutionary process in gear manufacturing uses drop-forged raw material, precision machined and heat treated with precise ratios between teeth and body.

Chain End Stops:

User friendly heavy duty end stops make it easy for the operator to position the chain while “freewheeling”, but most importantly this “end stop” will hold a load of at least 2.5 times the rated capacity when supporting the full load without restraint from other components e.g. brake or gearing.

Chain stripper:

The new chain stripper is specifically designed to guide the load chain safely onto or off the load sheave without snagging or jamming. The fluted chain stripper allows the safe use of the PROLH when used in any orientation


Recessed forgings offer full protection to the load chain anchor bolts on all our bottom hooks.

Adaptor Components:

Drop forged adaptor maintaining maximum strength. 360° Rotation and 180° Pivot for MaximumFlexibility. Tested and certified to 4:1 factor of safety.

Self-locking (safety) hook, clevis shackle, reevable egg (master) link or sling hook fittings available (for units up to 10t capacity).


Tiger lever hoist handles are ultra-strong, with strengthening side ribs. This special feature:

  • Protects against impact damage
  • Protects the label
  • Increases its robustness and longevity
  • Eliminates torsion.


The PROLH lever hoist has undergone a full test program that includes:

Type Testing

  • Ultimate strength test, at least 4 times the Working load limit (WLL)
  • Chain end anchorage test, passing at least 4 times the WLL without any restriction of the brake or gears

Test on every hoist

  • Proof loading at 1.5 times the rated capacity
  • Light load testing at maximum of 2% rated capacity


High performance premium quality grease allows the PROLH hoists to be certified for use within a temperature range of -40°C to +50°C far exceeding the requirements of current standards.


The PROLH is finished in our high quality powder coat paint offering excellent corrosion protection.



The data tables in the downloadable PDF have further hook measurements and the extra mass per metre information which isn’t currently available in the data table below.


Due to our policy of continual product development, dimensions, weights and specifications may change without prior notice. Please check with your Tiger sales team when ordering.